DOWN EASTER

Designed with the features you expect.
Reliable and rugged scissor hoist, for proven load dumping of the heaviest materials.
10 Gauge construction throughout, with structural channel understructure.
Easy release, locking pins for tailgate, top and bottom.
Bolt on Sub frame, hoist and body, for ease of installation, transfer or replacement.
LED lighting for visibility and less maintenance.
2.5″ lower bed height than previous models

STANDARD FEATURES All models are bolt on installation.
GENERAL TAILGATE
* 10 gauge construction throughout. * Formed 10 gauge inner, outer and end panels.
* Dirt shedding , sloped design at side plate and tailgate top * 1″ hardened pins, (1″ Stainless) with plasma cut
* Double panel side plates equal over 1/4″ thickness. latch receiving lock fingers.
* Full depth 3/16″rear corner pillars incorporate recessed lighting, * Adjustable 1/4” chain for spreading aggregate
keyhole banjo eyes and lower tailgate pin receiver. material & holding gate in down position.
* All lighting is LED rubber mounted and NTEA and Federal compliant.
* 2 1/2″ shorter deck height (9′ only) CAB SHIELD
* Mounting height of 9.5″ chassis to floor (9′ only) * Bolt on, 10GA (12GA SS) cab protector / overhang, for
* 10″ board extension pockets ease of install & future optional / custom overhang.
* Self aligning rear latch release for the top gate pins * 12″ (1/4 cab) overhang, standard. (8′, 9′, & 11′)
* Integrated tarp hooks * Pre punched tarp mounting provisions.
* DuPont™ Imron® Elite black oven * Slotted dual windows
cured paint w/ epoxy primer
OPTIONS
FLOOR & UNDERSTRUCTURE * Stainless body construction (excluding DED0888)
* 4″ x 5.7# Channel long sills and 3″ channel cross members (9′) * 24″ Cab Shield (1/2 cab)
* 6″ x 8.2# Channel long sills (10′, 10.5′ 11′) * Tarp assembly, manual or spring loaded.
* 3/16″ Stainless formed 7″ long sills (SS body) * 3/16″ floor (on 9′ & 10′ only)
* 3″ stainless tubing, interlaced cross members (SS body) * Coal chute, installed, painted or stainless
* Two piece 10 gauge floor with 45 degree slopped corners * Backup, running or strobe lights in apron