SWAMPY HOLLOW

HD MASON DUMP BODY

Standard Features

  • 6” x 8.2 lb. structural channel long sills
  • 3” structural channel cross members 12 o.c.
  • 10 ga. steel floor formed with inner side wall
  • 12 ga. outer wall sides with box formed top and V-formed outside wall with 2 vertical braces
  • 18” cab shield, with mesh window and brackets for side boards (various heights available)
  • Rear posts 6” higher than sides with brackets for side boards
  • Dump body light kit includes marker & clearance lights and 1 stop/turn/taillight per rear corner post with wiring harness. Meets (FMVSS108)
  • Available with 12”, 18”, or 24” sides
  • Standard width 96” outside
  • Inside width 86-3/4”
  • Tailgate Standard Features:
    • Constructed with 10 ga. Steel
    • Fully boxed frame with 2 – 12ga. vertical posts
    • Standard height – 6” higher then sides
    • Fully double acting with bottom release lever at driver’s side, Upper release is quick release screw pin style
    • Standard with spreader chains and banjo eye chain holders on rear post

HD STAKE BODY

Standard Features:

  • 48” high weld-on bulkhead with mesh window. Also available in 42”, 54”, or 60” high
  • 3/4” LED Marker and clearance light kit meets (FMVSS108) Includes wiring harness
  • Primed and painted black, (other colors available)
  • Structural channel long sills | 8’6” – 14’6” 6” x 8.2 lb. channel | 16’6” – 20’6” 7” x 9.8 lb. channel | 22’6” – 26’6” 8” x 11.5 lb channel
  • 3” Structural channel crossmembers 12” o.c.
  • 4” Structural channel rear rail
  • 10 ga. smooth steel floor with formed side rails
  • 3/16” heavy duty exterior stake pockets with 3/8” x 2” rub rail on sides and rear
  • Standard overall width 96” (optional 102” wide)
  • Stake Racks:

    • Available in 3 slats up to 36” high, 4 slats up to 48” high
    • Constructed with 11 ga. reinforced hat stakes and 16 ga. roll formed slats
    • Spring loaded latch system on stakes assure secure attachment to body
    • Optional rear swingout racks with weld-on or bolt-on rear post
    • Optional convert to a landscape body using solid lift-out racks or use mesh or plywood on our slatted racks
    • Rack weight per 4’ section – 4 slat 48” high (55 lbs.) – 3 slat 36” high (43 lbs.
    • Options:

      • Floor: T&G treated pine, apitong hardwood, treadplate, or anti slip floor paint
      • Full rear 10” drop light apron Includes oval stop/tail,turn, reverse, and license plate lights with wiring harness
      • Cab shield (various sizes available)
      • ICC bumpers
      • Custom sizes and configurations available

HD BEAVERTAIL LANDSCAPE BODY

Standard Features:

  • 4” Structural channel long sills
  • 3” Formed channel cross members – 12” centers
  • 1/8” Diamond plate floor
  • 60” High 1-1/2” steel tubing and mesh bulkhead with 18” side returns and built-in 24” high storage box with lockable drop down door
  • Perimeter wall – 1-1/2” steel tubing
  • 18” High expanded metal permanentmount sides
  • 60” Long (92” wide) expanded metal spring assisted loading ramp
  • 4 D-Rings on floor per side (more optional)
  • Primed and painted black (other colors available)
  • 4 Foot rear beaver tail
  • 6” Oval stop/turn/tail and reverse lights with marker and clearance light kit. Meets (FMVSS108) Includes wiring harness
  • OPTIONS

    • Custom designed to your specifications
    • Mesh shelf under toolbox
    • Fold down sides
    • Shovel/weedeater rack
    • 2” Hitch receiver with ICC bumper – includes D-rings and 7 pin RV style trailer connector
    • Split rear ramps