SWITCH AND GO TRUCK BODIES

OVERVIEW of the Original

usa-toughThe Switch-N-Go® body changing system allows you to interchange truck bodies simply and easily in a matter of minutes.  You can set a loaded body on the ground or pick up a loaded body.

The Original system is designed to run with electronically powered hydraulics. This saves you the expense of adding a power take-off and pump to your automatic transmission. The system is offered with 12,000 or 15,000 pound pull capacity winches. The Switch-N-Go® system has all of the benefits of a dump body as the scissor hoist will achieve a 50-degree dump angle, which is perfect for dumping mulch, asphalt, compacted soil, and more, dumping upwards of 11 tons. The system is designed for trucks with a GVWR of 13,000 – 26,000 lbs.

  • tructural tubing: 2” x 5” x .188”
  • Side rollers: 2 ½” diameter
  • Wear bars: ¼”
  • Wire rope: 25’ long
  • Ideal truck GVWR: 13,000 to 26,000 lbs.
  • Lifting capacity: 8.6 ton or 11 ton hoist
  • For Class 3-7 trucks
  • .
    • High quality, durable powder coated finish
    • Minimum payload impact
    • Scissor hoist with a 50° dump angle
    • Easy maintenance
    • Toggle switch controller with access inside and outside the cab
    • Positive front body locks and keeper
    • Rear body hold downs

OVERVIEW of the HD

The Switch-N-Go® body changing system allows you to interchange truck bodies simply and easily in a matter of minutes. You can set a loaded body on the ground or pick up a loaded body.

The HD system is designed to run with clutch pump or PTO driven hydraulics. You gain unlimited load and unload cycles in a day. This is great for the waste hauling industry where volume is key. The system is offered with a 15,000 or 18,000 lb. hydraulic winching capacity. The Switch-N-Go®system has all of the benefits of a dump body as the scissor hoist will achieve a 50-degree dump angle, which is perfect for dumping mulch, asphalt, compacted soil, and more, dumping upwards of 10 tons. The system is designed for trucks with a GVWR of 13,000 – 33,000 lbs.

  • Structural tubing: 2” x 6” x .188”
  • Side rollers: 2 ½” diameter
  • Wear bars: ¼”
  • Wire rope: 25’ long
  • Ideal truck GVWR: 13,000 to 33,000 lbs.
  • Lifting capacity: 9.6 ton or 12 ton hoist
  • For Class 3-7 trucks
    • Unlimited load, lift and dump cycles
    • High quality, durable powder coated finish
    • Minimum payload impact
    • Scissor hoist with a 50° dump angle
    • Easy maintenance
    • Toggle switch controller with access inside and outside the cab
    • Positive front body locks and keeper
    • Rear body hold downs
    • 15,000 load capacity
      • Switch-N-Go® HD: Loader System: Sized for trucks with 9’ to 14’ cab to end of frame measurements
      • Scissor Hoist: 5” bore with 16” or 20” stroke and 6” bore with 20” stroke